Self-reported exposure to dust and diesel exhaust, respiratory symptoms, and use of respiratory protective equipment among Arctic miners.

Arctic miners face significant risks from diesel exhaust and dust exposure, potentially leading to adverse respiratory health. Employers must limit harmful exposures, using personal protective equipment (PPE) as a last line of defense. This study explored the association between reported respiratory exposure and symptoms, and PPE training and usage. Data from the MineHealth study (2012-2014) included a total of 453 Arctic open pit miners in Norway, Sweden, and Finland. Participants answered questions on exposure to dust and diesel exhaust, respiratory symptoms, and PPE use, in addition to age, gender, BMI, smoking, and self-rated health. Estimated exposure to dust was common, reported by 91%, 80%, and 82% and that of diesel exhaust by 84%, 43%, and 47% of workers in Sweden, Finland, and Norway, respectively. Reported dust exposure was significantly related to respiratory symptoms (OR 2.2, 95% CI 1.3-3.7), diesel exposure increased the occurrence of wheezing (OR 2.6, 95% CI 1.3-5.4). PPE use varied between the studied mines. Non-use was common and related to reduced visibility, wetness, skin irritation and fogging of the respiratory PPE. Future research should employ more precise exposure assessment, respiratory function as well as explore the reasons behind the non-compliance of PPE use.

Assessment of genotoxicity biomarkers in gasoline station attendants due to occupational exposure.

Gasoline station attendants are exposed to numerous chemicals that might have genotoxic and carcinogenic potential, such as benzene in fuel vapor and particulate matter and polycyclic aromatic hydrocarbons in vehicle exhaust emission. According to IARC, benzene and diesel particulates are Group 1 human carcinogens, and gasoline has been classified as Group 2A "possibly carcinogenic to humans." At gas stations, self-service is not implemented in Turkey; fuel-filling service is provided entirely by employees, and therefore they are exposed to those chemicals in the workplace during all working hours. Genetic monitoring of workers with occupational exposure to possible genotoxic agents allows early detection of cancer. We aimed to investigate the genotoxic damage due to exposures in gasoline station attendants in Turkey. Genotoxicity was evaluated by the Comet, chromosomal aberration, and cytokinesis-block micronucleus assays in peripheral blood lymphocytes. Gasoline station attendants (n = 53) had higher tail length, tail intensity, and tail moment values than controls (n = 61). In gasoline station attendants (n = 46), the frequencies of chromatid gaps, chromosome gaps, and total aberrations were higher compared with controls (n = 59). Increased frequencies of micronuclei and nucleoplasmic bridges were determined in gasoline station attendants (n = 47) compared with controls (n = 40). Factors such as age, duration of working, and smoking did not have any significant impact on genotoxic endpoints. Only exposure increased genotoxic damage in gasoline station attendants independently from demographic and clinical characteristics. Occupational exposure-related genotoxicity risk may increase in gasoline station attendants who are chronically exposed to gasoline and various chemicals in vehicle exhaust emissions.

Welding fume exposure and prevalence of chronic respiratory symptoms among welders in micro- and small-scale enterprise in Akaki Kality sub-city, Addis Ababa, Ethiopia: a comparative cross-sectional study.

BACKGROUND: Exposure to welding fumes can lead to different respiratory health disorders, including lung cancer, due to long-term exposures. In Ethiopia, large numbers of people are engaged in the welding sector. Often, these workers are exposed to welding fumes at their workplaces, however, the level of exposure and its health effects have never been studied. OBJECTIVE: To measure the level of personal welding fume exposure and assess chronic respiratory symptoms and associated factors, among micro and small-scale enterprise metal workshop workers, in Akaki Kality Sub city, Ethiopia. METHODS: A comparative cross-sectional study involving 226 welders and 217 controls. Chronic respiratory symptoms were assessed using a standardized questionnaire adopted from the American Thoracic Society (ATS). Welding fumes were collected from the welder's breathing zone using 37 mm close-faced plastic cassettes fitted with Polyvinyl Chloride (PVC) filters connected to Casella pumps at an airflow rate of 2 L/min. RESULT: The overall prevalence of chronic respiratory symptoms among welders and controls were 54 (23.9%) and 20 (9.2%) respectively. The geometric mean and geometric standard deviation (GSD) of personal welding fume exposure, among welders was 5.98 mg/m3 (± GSD = 1.54). In this study, 53.3% of the samples exceeded the Occupational Exposure Limit defined by the American Conference of Governmental Industrial Hygiene. Chronic respiratory symptoms were significantly associated with educational status (Adjusted Odds Ratio (AOR): 5.11, 95% CI: 1.35, 19.33), respiratory protective equipment use (AOR: 3.33, 95% CI: 1.52, 7.31), safety training (AOR: 2.41, 95% CI: 1.10, 5.28), smoking (AOR:3.57, 95% CI: 1.54, 8.23), welding machine maintenance (AOR: 1.87, 95% CI: 1.01, 3.59) and welding site (i.e. indoors vs. outdoor) (AOR: 6.85. 95% CI: 2.36, 19.89). CONCLUSIONS: The prevalence of chronic respiratory symptoms among welding workers was significantly higher than controls. More than half of the samples exceeded the Occupational Exposure Limit. Educational status, implementation of safety training, and welding sites were significantly associated with chronic respiratory symptoms. The results suggested a need to reduce welding fume exposure to improve the respiratory health of the workers.

[Exploration of detection methods for free silica with different crystal forms in dust].

Objective: To investigate the differences and applicability of free silica detection methods of different crystal forms in dust, and to provide a basis for the selection of various methods. Methods: From December 2021 to June 2022, dust samples from 20 enterprises in different industries in 18 cities in Henan Province were randomly selected as the investigation objects. X-ray diffraction (XRD) method was used to analyze the samples and classify the samples. Based on GBZ/T 192.4-2007 "Determination of Dust in the Air of Workplace-Part 4: Content of Free Silica in Dust", pyrophosphate method and infrared spectrophotometry were used for quantitative determination. The measured results were analyzed by paired sample t test to evaluate the advantages and disadvantages of the two methods and their applicable scope. Results: The XRD results of 20 dust samples could be divided into α, ß, γ crystal types and the mixed type of α and γ. There was no significant difference between pyrophosphate method and infrared spectrophotometry (P=0.180). The pyrophosphate method results of ß, γ and α, γ mixed crystalline free silica were significantly higher than those of infrared spectrophotometry, and the difference was statistically significant (P<0.001) . Conclusion: Pyrophosphate method and infrared spectrophotometry are suitable for α-type free silica, while pyrophosphate method is suitable for ß, γ and α, γ mixed crystalline free silica.

[Ion chromatography for the determination of n-butylamine in the workplace air].

Objective: To establish a method for the determination of n-butylamine in the air of the workplace by ion chromatography. Methods: In February 2022, on-site sampling was carried out using an atmospheric sampler. N-butylamine was adsorbed by a neutral silica gel tube and then performed for qualitative and quantitative determination by ion chromatography after ultrasonic desorption with 10 mmol/L sulfuric acid solution. Results: The linear range of the method was 0.0375-100.0 µg/ml, the linear equation of the standard curve was y=0.0713x-0.0327, the correlation coefficient was 0.9992. The detection limit of the method was 11.25 µg/L, and the lower limit of quantification was 37.50 µg/L, the lowest quantitative concentration was 0.025 mg/m(3) (in term of sampling 7.5 L). The average desorption efficiency of the method was 91.50%-95.38%, the precision was 1.10%-2.30%, the standard recovery was 83.83%-100.02%, sampling efficiency was 100.00%. Conclusion: This method is fast, sensitive and accurate, and can be used for the determination of n-butylamine in the air of workplace.

[Determination of dimethyl oxalate and diethyl oxalate in workplace air by high performance liquid chromatography].

Objective: To establish a high performance liquid chromatography method for the simultaneous determination of dimethyl oxalate (DMO) and diethyl oxalate (DEO) in workplace air. Methods: From January 2022 to January 2023, air samples were collected by silica gel tubes, desorbed by acetonitrile, separated by C18 chromatographic column, detected by photo-array detector, and retention time was used to characterize and peak area was used to quantify at 210 nm wavelength. Results: The linear relationships of DMO and DEO were good, r>0.999. The detection limits of DMO and DEO were 0.39 and 0.52 µg/ml, respectively. The quantitative limit was 1.28 µg/ml for DMO and 1.72 µg/ml for DEO. Average desorption efficiency for DMO was 82.40%-92.72%, and DEO was 94.13%-97.69%. The intra-assay precision of DMO was 1.87%-6.18%, and DEO was 2.25%-3.31%. Inter-assay precision of DMO was 3.29%-5.73%, and DEO was 1.38%-2.94%. Average sampling efficiencies were 100% for both DMO and DEO. Breakthrough capacity of DMO was 37.61 mg (200 mg solid adsorbent), DEO was >28.11 mg (200 mg solid adsorbent). Samples should be stored at 4 ℃ for at least 7 days. Conclusion: This method is easy to operate and has strong practicability. All indicators meet the requirements of the specification, and it is suitable for the simultaneous determination of DMO and DEO in the workplace air.

[Discussion on the application status and method improvement of gas chromatography in occupational health inspection standards in China].

As a rapid, accurate and efficient analytical technique, gas chromatography is widely used in the detection of volatile organic compounds and inorganic small molecule toxins, and it is the main analytical method in the national testing standards for occupational health. The existing effective national standards of gas chromatography for the detection of some substances have low column efficiency, high toxicity of reagents, poor correlation of the standard curve and low desorption efficiency and other problems, some of which can be solved through method improvement. At the same time, with the use of new materials and new processes, new types of toxic substances are emerging, and there are still many occupational disease hazards of limited value without supporting detection methods, gas chromatography can be applied to the detection of some toxic substances to better complement the vacancy of China's occupational health detection methods. This paper analyzes the current situation of the application of gas chromatography in occupational health testing standards, discusses the improvement of some of these methods, and helps to promote the application and development of gas chromatography in occupational health testing.

Respirable dust and crystalline silica concentrations among workers at a brick kiln in Bhaktapur, Nepal.

Exposure to respirable dust and crystalline silica (SiO2) has been linked to chronic obstructive pulmonary disease, silicosis, cancer, heart disease, and other respiratory diseases. Relatively few studies have measured respirable dust and SiO2 concentrations among workers at brick kilns in low- and middle-income countries. The purpose of this study was to measure personal breathing zone (PBZ) respirable dust and SiO2 concentrations among workers at one brick kiln in Bhaktapur, Nepal. A cross-sectional study was conducted among 49 workers in five job categories: administration, fire master, green (unfired) brick hand molder, green brick machine molder, and top loader. PBZ air samples were collected from each worker following Methods 0600 (respirable dust) and 7500 (respirable crystalline SiO2: cristobalite, quartz, tridymite) of the U.S. National Institute for Occupational Safety and Health. Eight-hour time-weighted average (TWA) respirable dust and quartz concentrations were also calculated. SiO2 percentage was measured in one bulk sample each of wet clay, the release agent used by green brick hand molders, and top coat soil at the brick kiln. The geometric mean (GM) sample and TWA respirable dust concentrations were 0.20 (95% confidence interval [CI]: 0.16, 0.27) and 0.12 (95% CI: 0.09, 0.16) mg/m3, respectively. GM sample and TWA quartz concentrations were 15.28 (95% CI: 11.11, 21.02) and 8.60 (95% CI: 5.99, 12.34) µg/m3, respectively. Job category was significantly associated with GM sample and TWA respirable dust and quartz concentrations (all p < 0.0001). Top loaders had the highest GM sample and TWA respirable dust concentrations of 1.49 and 0.99 mg/m3, respectively. Top loaders also had the highest GM sample and TWA quartz concentrations of 173.08 and 114.39 µg/m3, respectively. Quartz percentages in bulk samples were 16%-27%. Interventions including using wet methods to reduce dust generation, administrative controls, personal protective equipment, and education and training should be implemented to reduce brick kiln worker exposures to respirable dust and SiO2.

Biomonitoring of polycyclic aromatic hydrocarbons exposure and short-time health effects in wildland firefighters during real-life fire events.

Human biomonitoring data retrieved from real-life wildland firefighting in Europe and, also, worldwide are scarce. Thus, in this study, 176 Portuguese firefighters were biomonitored pre- and post- unsimulated wildfire combating (average:12-13 h; maximum: 55 h) to evaluate the impact on the levels of urinary polycyclic aromatic hydrocarbons hydroxylated metabolites (OHPAH; quantified by high-performance liquid chromatography with fluorescence detection) and the associated short-term health effects (symptoms, and total and differentiated white blood cells). Correlations between these variables and data retrieved from the self-reported questionnaires were also investigated. Firefighters were organized into four groups according to their exposure to wildfire emissions and their smoking habits: non-smoking non-exposed (NSNExp), non-smoking exposed (NSExp), smoking non-exposed (SNExp), and smoking and exposed (SExp). The most abundant metabolites were 1-hydroxynaphthalene and 1-hydroxyacenaphthene (1OHNaph + 1OHAce) (98-99 %), followed by 2-hydroxyfluorene (2OHFlu) (0.2-1.1 %), 1-hydroxyphenanthrene (1OHPhen) (0.2-0.4 %), and 1-hydroxypyrene (1OHPy) (0.1-0.2 %); urinary 3-hydroxybenzo(a)pyrene was not detected. The exposure to wildfire emissions significantly elevated the median concentrations of each individual and total OHPAH compounds in all groups, but this effect was more pronounced in non-smoking (1.7-4.2 times; p ≤ 0.006) than in smoking firefighters (1.3-1.6 times; p ≤ 0.03). The greatest discriminant of exposure to wildfire emissions was 1OHNaph + 1OHAce (increase of 4.2 times), while for tobacco smoke it was 2OHFlu (increase of 10 times). Post-exposure, white blood cells count significantly increased ranging from 1.4 (smokers, p = 0.025) to 3.7-fold (non-smokers, p < 0.001), which was accompanied by stronger significant correlations (0.480 < r < 0.882; p < 0.04) between individual and total OHPAH and total white blood cells (and lymphocytes > monocytes > neutrophils in non-smokers), evidencing the impact of PAH released from wildfire on immune cells. This study identifies Portuguese firefighters with high levels of biomarkers of exposure to PAH and points out the importance of adopting biomonitoring schemes, that include multiple biomarkers of exposure and biomarkers of effect, and implementing mitigations strategies.

Development of the Korean construction job exposure matrix (KoConJEM) based on experts' judgment using the 60 consolidated occupations for construction workers.

BACKGROUND: This study was conducted as an effort to develop a Korean construction job exposure matrix (KoConJEM) based on 60 occupations recently consolidated by the construction workers mutual aid association for use by the construction industry. METHODS: The probability, intensity, and prevalence of exposure to 26 hazardous agents for 60 consolidated occupations were evaluated as binary (Yes/No) or four categories (1 to 4) by 30 industrial hygiene experts. The score for risk was calculated by multiplying the exposure intensity by the prevalence of exposure. Fleiss' kappa for each hazardous agent and occupation was used to determine agreement among the 30 experts. The JEM was expressed on a heatmap and a web-based dashboard to facilitate comparison of factors affecting exposure according to each occupation and hazardous agent. RESULTS: Awkward posture, heat/cold, heavy lifting, and noise were hazardous agents regarded as exposure is probable by at least one or more experts in all occupations, while exposure to asphalt fumes was considered hazardous in the smallest number of occupations (n = 5). Based on the degree of agreement among experts, more than half of the harmful factors and most occupations showed fair to good results. The highest risk value was 16 for awkward posture for most occupations other than safety officer. CONCLUSIONS: The KoConJEM provides information on the probability, intensity, and prevalence of exposure to harmful factors, including most occupations employing construction workers; therefore, it may be useful in the conduct of epidemiological studies on assessment of health risk for construction workers.

Methods to assess dermal exposures in occupational settings: a scoping review.

OBJECTIVES: The dermal exposure route is expected to become increasingly significant relative to total worker exposure as inhalational exposure limits continue to decrease. However, standardization of occupational exposure assessment methods and scientific consensus are needed. This is the first scoping review mapping the literature across all dermal exposure assessment methods and their targeted substances/chemicals in occupational settings. METHODS: Eligibility criteria broadly included studies reporting any noninvasive dermal exposure assessment method in an occupational setting. The literature search (Web of Science and MEDLINE) was restricted to peer-reviewed, primary literature published in the last 20 years (2002-2022). Titles/abstracts were dual independently screened. Data charting was performed by a single reviewer using standard template. All stages were pilot tested. The JBI (formerly, the Joanna Briggs Institute) scoping review methods and PRISMA-ScR checklist (Preferred Reporting Items for Systematic Reviews and Meta-Analyses extension for Scoping Reviews) were used. RESULTS: In total, 493 articles were data charted and categorized by 4 study types: methods development (22%), exposure assessment (51%), health outcomes (21%), and controls assessment (6%). Fourteen types of dermal exposure assessment methods were charted with biomarkers (51%), dosimeters (21%), and qualitative assessments such as questionnaires or surveys (17%) most common. Seventeen different chemicals/substances were charted; pesticides (28%) and polycyclic aromatic hydrocarbons (PAHs) (22%) associated with crude oil products and combustion were most common. Mapping between substances and exposure assessment method categories, pesticide dosimeters (11%), and PAH biomarker studies (14%) were most reported. Literature gaps were identified for cleaning agents, hair dyes, glycol ether, N,N-dimethylformamide/N-methyl-2-pyrrolidone, dioxins, and bisphenol A. CONCLUSIONS: To foster scientific consensus, standardization across study reporting is needed for describing: (i) exposure assessment methods used, (ii) worker tasking/conditions, (iii) targeted substances and substance state, and (iv) targeted exposure routes. Overall, this review categorizes, maps, and defines the scope of literature for occupational dermal exposure assessment methods.

Respirable dust exposure impact on respiratory symptoms among cleaners in a Selangor Public University, Malaysia.

INTRODUCTION: Cleaners perform a vital role in environmental health by keeping the place clean, but they are also exposed to various hazards. Yet, there is a lack of effective and accessible occupational safety standard measures, thus making this to be difficult to monitor the long-term health effects of cleaners. This study aims to determine the respirable dust exposure on respiratory symptoms among cleaners in a public university in Selangor. MATERIALS AND METHODS: A cross-sectional study was carried out among 51 cleaners. The respondents' background information and respiratory symptoms were gathered using a series of standardised questionnaires validated by the American Thoracic Society (ATS-DLD-78-A). The 8- hour respirable dust exposure to cleaners was measured using an air sampling pump (Gillian & Sensodyne Gil Air 3). RESULTS: The mean of respirable dust was lower than permissible exposure limit with 0.63±0.57mg/m3. The respiratory symptoms among the cleaners showed no significant association between cough, phlegm, and breathing difficulties with working tenure. Meanwhile, wheezing and coughing with phlegm have an almost significant association with working tenure among cleaners with (Χ2=1.00, p=0.08) and (Χ2=1.00, p=0.07) respectively. Exposure to respirable dust has exhibited 6 times the prevalence of coughing with phlegm among cleaners (PR=6.28, 95% CI: 0.44, 89.38). CONCLUSION: The findings of this study demonstrated that the cleaners were significantly affected by the respirable dust. The cleaners' working environment has caused them to be exposed to respirable dust.

Working with cattle slurry on farms: emission and dispersion of hydrogen sulfide gas during stirring.

Over the past 15 years, there have been numerous fatalities related to working with animal slurry. Working with cattle slurry releases toxic gases, in particular, hydrogen sulphide (H2S), which can cause acute central nervous system toxicity, breathing difficulties, and death if exposed to high concentrations. Real-time measurements of H2S gas were taken over distance and time, during the stirring of cattle slurry on farms. Gas was measured at eight slurry stores with differing typical configurations of indoor or outdoor stores and with or without slatted flooring. Highest H2S gas levels were measured from indoor stores under slatted floors, and generally at positions closest to the stirrer or the point of maximum stirring, with levels decreasing with distance from source. Most of the data indicate H2S gas levels increase very rapidly after stirring starts, and mostly decline to baseline levels within 30 min post start of stirring. There were, however, circumstances where gas levels remained high and only started to decline once the stirrer had stopped. H2S gas levels at all farms, at all positions measured were consistently below 10 ppm within 30 min of the stirrer being stopped. The current data highlight areas of the farm and ways of working that have the potential for workers and others to be at risk of exposure to toxic slurry gases. The area should be left to ventilate naturally for at least 30 min after the stirrer has been stopped before re-entering buildings. Influencing the design of stirring equipment and future slurry stores would likely reduce the risk of worker exposure to slurry gases.

Occupational exposure of firefighters to hazardous pollutants during prescribed fires in Portugal.

Firefighters perform high-risk activities and during the course of their functions are highly exposed to a wide range of occupational hazards, including air pollution. Thus, this study aimed to assess the exposure of firefighters in prescribed wildland fires and their occupational exposure, as well as to identify and chemically characterise the particles collected during wildland firefighting and inside fire stations. Exposure to wildfire smoke was evaluated in 7 prescribed fires in Portugal, 2 in the north and 5 in the south of Viseu district. The concentrations of PM2.5, NO2, SO2, CO and VOCs were monitored and exceedances to occupational exposure limit values were identified. Moreover, the chemical composition of PM2.5 was analysed. The results showed that firefighters were exposed to high concentrations of these pollutants during prescribed fires and that, in some cases, exceeded occupational exposure limits, both for time-weighted average concentrations for an 8-h working day (a time-weighted average, TWA) of PM2.5, and for short-term exposure values (STEL) of NO2 and SO2. Despite being exposed to very high concentrations of CO, no exceedances to the occupational exposure values were observed. FT-IR and SEM-EDS allowed to chemically characterise the composition of the particles collected inside the fire stations and also during wildland fires, identifying mainly quartz, aluminium and magnesium silicates, characteristic of earth's crust constituents. and also, fibres that have undergone combustion. Concluding, firefighters' exposure to high concentrations of harmful pollutants, can lead to the degradation of their respiratory health. It is therefore extremely important to increase existing knowledge and conduct further studies, especially longitudinal ones, that can assess their lung function. This will allow an understanding of the impacts of smoke on firefighters' health and develop effective strategies to protect them during wildland firefighting operations.

[Comparison and analysis research on occupational exposure limits of coal dust between China and foreign countries].

Objective: To study and compare the occupational exposure limits (OELs) of coal dust between China and foreign countries, understand the OEL of coal dust in China, and provide data and basis for revising the OEL of coal dust in China. Methods: In August 2023, by searching the official websites of limits setting institutions in relevant countries and regions at home and abroad, collecting and sorting out the OELs of coal dust issued by 10 limit setting institutions in 6 countries and the background information of the formulation, and conducting specific analysis on the classification, limit level and formulation principles of coal dust OEL in each country/institution. Results: In China and Japan, the total dust and respirable dust of coal dust OEL were established respectively, while in other countries, only the time-weighted average concentration (TWA) of respirable coal dust exposure was established. The TWA prescribed by China's Notional Health Commission, the United States Occupational Safety and Health Administration (OSHA) , the United States Mining Safety and Health Administration (MSHA) and the Australian Safety Work Bureau when the SiO(2) content was less than 5% were 5, 2.4, 2 and 3 mg/m(3) respectively. China GBZ 2.1-2019 sets the limit of 2.5 mg/m(3) for respirable coal dust with SiO(2) content less than 10%. The TWA set by the American Conference of Government Industrial Hygienists (ACGIH) and the South African Department of Mines and Energy (DME) for anthracite coal were 0.4 and 0.8 mg/m(3), respectively, and bituminous coal or lignite were 0.9 and 1.8 mg/m(3), respectively. The respirable coal dust TWA set by the National Institute for Occupational Safety and Health (NIOSH) in the United States was 1 mg/m(3), and the TWA set by the New Zealand Work Safety Authority was 3 mg/m(3). Conclusion: At present, the OEL of coal dust in China is at a relatively loose level, and it is suggested to further explore the possibility of revising coal dust OEL.

[The method of determination for 2, 3-Butanedione in the air of workplace by high performance liquid chromatography with derivatization].

Objective: To establish a method for the determination of 2, 3-Butanedione (BUT) in the air of workplace, which including the process of collection by absorption in phosphoric acid aqueous solution and the process of analysis and detection by high performance liquid chromatography with derivatization. Methods: In October 2022, a porous glass plate absorption tube containing 10 ml of 0.01% phosphoric acid solution was used to collect BUT in the air of the workplace at a flow rate of 0.2 L/min. The absorption solution was derived by 2, 4-dinitrophenylhydrazine for 75 min and separated on a SB-C18 column (250 mm×4.6 mm, 5 µm) . At the column temperature of 30 ℃, the mixture of acetonitrile-water (V∶V, 1∶1) was eluted at the flow rate of 1.0 ml/min. It was detected by UV detector (λ=365 nm) , qualitatived by retention time and quantitatived by external standard. Results: It showed that BUT in phosphoric acid aqueous solution could be stored for at least 7 d at 4 ℃. There was a linear relationship within the determination range of 0.05-6.00 µg/ml, the linear regression equation was y=89.610x+0.133, r=0.9999. The sampling absorption efficiencies were 98.33%-100.00%, the detection limit of the method was 0.005 µg/ml, the minimum detection concentration was 0.016 mg/m(3) (based on V(0)=3.0 L) . The recovery rates were 95.96%-102.44%, the intra batch precision were 4.36%-7.78%, and the inter batch precision were 4.96%-6.06%. Conclusion: The method has the advantages of simple operation, high sensitivity and good accuracy. It can prevent the loss and degradation of BUT. It can be used for the determination of BUT in the air of workplace.

Preliminary analyses of accumulation of carcinogenic contaminants on retired firefighter ensembles.

Personal protective equipment (PPE) is designed to protect firefighters from hazards encountered on the fire scene, including heat and products of combustion. Decontamination practices for firefighter turnout gear have been developed to remove combustion products and other contaminants from the fabric of structural firefighting ensembles (i.e., turnout or bunker gear). Chronic exposures to residual polycyclic aromatic hydrocarbons (PAH) are a contributing cause of firefighter cancers. To identify and quantify residual contamination of PAH, samples were taken from two individual decommissioned structural firefighting ensembles and analyzed by layer (outer canvas shell, moisture barrier, and the thermal protective liner) for (1) textile integrity via field emission scanning electron microscopy and (2) quantity of PAH contamination by high-pressure liquid chromatography with ultraviolet/fluorescence detection. The results of these analyses show the presence of the PAH compounds pyrene (35% of the total mass of PAH), phenanthrene (21%), benzo(a)pyrene (14%), and benzo(a)anthracene (14%) which present a risk for dermal absorption. The data also revealed that PAH penetration through the layers of the firefighting ensemble was strongly inhibited by the moisture barrier layer.

Development of handling energy factors for use of dustiness data in exposure assessment modelling.

Several exposure assessment models use dustiness as an input parameter for scaling or estimating exposure during powder handling. Use of different dustiness methods will result in considerable differences in the dustiness values as they are based on different emission generation principles. EN17199:2019 offers 4 different dustiness test methods considering different dust release scenarios (e.g. powder pouring, mixing and gentle agitation, and vibration). Conceptually, the dustiness value by a given method can be multiplied with a scenario-specific modifier, called a handling energy factor (Hi), that allows conversion of a dustiness value to a release constant. Therefore, a Hi, scaling the effective mechanical energy in the process to the energy supplied in the specific dustiness test, needs to be applied. To improve the accuracy in predictive exposure modelling, we derived experimental Hi to be used in exposure algorithms considering both the mass- and number-based dust release fraction determined by the EN17199-3 continuous drop (CD) and the EN17199-4 small rotating drum (SRD) test methods. Three materials were used to evaluate the relationship between dustiness and dust levels during pouring powder from different heights in a controlled environment. The results showed increasing scatter and difference between the Hi derived for the 2 test methods with increasing pouring height. Nearly all the Hi values obtained for both SRD and CD were <1 indicating that the dustiness tests involved more energy input than the simulated pouring activity and consequently de-agglomeration and dust generation were higher. This effect was most pronounced in CD method showing that SRD mechanistically resembles more closely the powder pouring.

Assessment of PAH exposure and health risks among South Korean firefighters based on urinary PAH metabolites.

Polycyclic aromatic hydrocarbons (PAHs) comprise a group of compounds resulting from the incomplete combustion of organic matter. Firefighters engaged in fire suppression are highly exposed to PAHs. This study centered on evaluating the exposure levels and health risks of PAHs in South Korean firefighters involved in firefighting activities. The concentrations of 10 PAH metabolites in the urine of firefighters were measured immediately after, and two weeks post their engagement in extinguishing a large tire factory fire. The levels of OH-PAHs in urine samples immediately after fire suppression were elevated by a factor of 1.01-1.84 compared to urine samples from non-exposed period. The median concentration of total PAH metabolites (OH-PAHs) was higher in urine samples immediately after fire suppression (5910 ng/g creatinine) than in urine samples from non-exposed periods (5020 ng/g creatinine). However, the ∑OH-PAH levels in firefighters' urine were related to personal habits such as smoking. The concentrations of all individual OH-PAHs in the urine samples of nonsmokers exhibited a substantial increase, ranging from 1.37 to 2.3 times, clearly demonstrating that firefighting activities were a substantial source of PAH exposure. The calculated values associated with the health risks stemming from exposure to PAHs, including carcinogenic risk, total estimated daily intake (TEDI), and hazard quotients/index (HQs/HI), all fell within acceptable limits, indicating negligible risk. However, the HQ/HI values and TEDI for individual and total PAH exposures, except those for naphthalene, were 1.36-2.00 times higher in firefighters' samples taken after firefighting operations compared to those during regular duty. This underscores the need for more comprehensive investigations to comprehend the singular impact of firefighting activities due to the diverse sources of PAH emissions in the environment.

A temporal evaluation of respirable crystalline silica exposure for construction tasks.

Personal air monitoring using a TSI SidePak AM520 personal aerosol monitor was performed on a northern Colorado construction site during five tasks from the OSHA Table 1: Specified Exposure Control Methods When Working With Materials Containing Crystalline Silica to estimate silica dust concentrations in real time. Photometric measurements were modified using a gravimetric correction factor and a % respirable crystalline silica adjustment. Each task was sampled once; sample time ranged from 14 min to 40 min, with a mean sample time of 27 min. The mean silica dust concentration estimates (µg/m3) (standard deviation [SD]) for the five tasks computed from the TSI SidePak AM520 respirable dust measurements were core drilling 12 µg/m3 [2.46], grinding 918 µg/m3 [1134.08], cutting with a walk-behind saw 36 µg/m3 [79.67], jackhammering 27 µg/m3 [23.24], and dowel drilling 66 µg/m3 [77.65]. Silica exposure estimates from real-time monitoring can be used to identify exposures that may be related to inadequate controls or worker behaviors that contribute to peak exposures. Respirable crystalline silica exposure estimates presented here are likely not generalizable to other construction sites or tasks.